http://4.bp.blogspot.com/-0Zs40dM4oP...mn+Hippies.jpg
Printable View
:facepalm2:
I always fit the bearings to the quaife first then fit it in and check the bearing preload then once ok fit the crown wheel and reassemble. With the quaife the preload most time is fine but always best to check.
Best to do them while its apart isn't it. Been reading up on it here. Doesn't look to hard to do
http://www.courtenaysport.co.uk/down...=1&statusbar=1
Bought 1 wheel.
Modding your unicycle dutchy?
Upgrading the front wheel on the Penny Farthing :p
I heard it was for his Reliant Robin